Hi William. Thank you for your question!
The stone crusher is cast by steel. Corrosion and rust will occur under the action of water and oxygen. This will cause damage to the stone crusher and reduce the service life of the stone crusher. Solution to prevent corrosion and rust of stone crusher:
1. The stone crusher should be stored in the drying room or sealed room to prevent corrosion and rust caused by the combination of moisture and oxygen.
2. If it does not work for a long time, the stone crusher should be operated for a few minutes at regular intervals to ensure good lubrication between the various parts of the crusher.
3. The stone crusher parts are removed from the body to be coated with preservatives.
4. The outer layer of the crusher should be coated with preservative or sealed to reduce the probability of rust.
5. When the stone crusher is used again after long-term storage, it is necessary to carry out an overall inspection of the crusher to prevent rust and corrosion or insufficient lubricating oil, and to reduce the efficiency and life of the crusher.
| 
