Hi Jimmy. Thank you for your question.

Will there be more stone powder produced by impact crusher? Now let's talk about the problem of stone content.

In the production process, we often hope that the content of stone powder can be kept at a low level. So how to reduce the content of stone powder? On the one hand, we can increase the size of discharge port and reduce the crushing ratio. On the other hand, we can reduce the feeding particle size when the size of the discharge port remains unchanged. Both methods are suitable for use in the production process of impact crusher.

In addition, I would like to share with you how to adjust when the stone particle size is not uniform enough. Firstly, there are generally two reasons for uneven stone shape, including too large feeding size and high material hardness. If too large materials cause uneven stones, we need to reduce the feeding size first, and then put it into impact crusher to ensure a reasonable crushing ratio. If the material hardness is high and the crushing is difficult, we also need to reduce the crushing ratio and appropriately increase the size of the ore discharge port to reduce the wear of the plate hammer and the impact plate. Both methods can solve the problem of uneven stones, and the key is to suit the remedy to the case.

Liming Heavy Industry's impact crusher can help materials shape like cube and the stone content is less, which is a medium and fine crusher loved by customers. If you need to process limestone and other soft rock materials, we recommend that you use LIMING crusher with high cost performance and good performance. In addition, we will also provide services such as scheme design, installation and commissioning, technical guidance and training, and look forward to cooperating with you.

Liming Heavy Industry (Shanghai)